Bulk Hot Melts

H9431

Extended open time APAO-based hot melt with good green strength. Bonds well to PE, PP, ABS and polyester substrates. Absence of residual tack at room temperature. Available in higher tack version (H9440).

Features:

R&B Softening Point (°F): 250

Viscosity (cps @ °F): 7,000 @ 375

Applications:

• Fiberglass to Foil Insulation,
• Fabric Bonding
• Panel lamination

Resources:

TDS

HM4379

APAO with short open time and good adhesion on PE and PP. Best used on extrusion applications. White in color

R&B Softening Point (°F): 257

Viscosity (cps @ °F): 2,700 @ 375

Resources:

H3199A

General purpose APAO-based hot melt with a broad service range and a good open time for non-structural assembly. Applications include filter end-cap attachement, mattress assembly and fabric bonding

R&B Softening Point (°F): 250

Viscosity (cps @ °F): 3,100 @ 350

Applications:

• Filter end-cap attachement
• mattress assembly and fabric bonding

Resources:

H9446

High performance APAO-based hot melt designed for adhesion to PE, PP and polyeter scrim. Used for transportation interior trim and "shoddy" pad bonding applications. Short open time with high heat resistance and SAFT rated at 240°.

R&B  Softening Point (°F): 301

Viscosity (cps @ °F): 10,300 @ 375

Applications:

• Transportation interior trim
• "shoddy" pad bonding applications

Resources:

H9389

APAO with short open time for high temperature, high performance assembly application. Excellent cohesive strength with high SAFT. Good adhesion to PE and PP.

R&B  Softening Point (°F): 315
Viscosity (cps @ °F): 25,000 @ 375

Applications:

• Air filter assembly applications

Resources:

H2790

Semi pressure-sensitive hot melt for bookbinding. Low viscosity allows for sugggested 275° to 300° F application temperature. Clear color. Excellent creep resistance.

R&B  Softening Point (°F): 155

Viscosity (cps @ °F): 750 @ 300

Resources:

H5077

General Purpose fugitive hot melt pressure sensitive adhesive. "Water white". Gives peelable bond between most polyethylene, polypropylene and paper substrates.

R&B  Softening Point (°F): 172

Viscosity (cps @ °F): 1,100 @ 375

Applications:

• Affixing credit card or brochures to polyethylene substrates

Resources:

H5265

This fugitive hot melt pressure-sensitive adhesive is "water white" in color. This is an improved version of #H5077 with a reduces level of staining, but higher peel values

R&B  Softening Point (°F):172

Viscosity (cps @ °F): 2,235 @ 300

Resources:

H4073A

General purpose hot melt PSA. Low viscosity. Good adhesion to PE, PP and nonwoven materials. Light color. SAFT is 135° F.

R&B  Softening Point (°F): 172
Viscosity (cps @ °F): 1,500 @ 325

Resources:

H2465

General purpose hot melt PSA with good tack and peel. Low viscosity. Can be used for spray and extrusion applications. Light to water-clear color. Can also be used for side glue for solft cover, spine glue for hard cover books and graphics.

R&B  Softening Point (°F): 182

Viscosity (cps @ °F): 2,050 @ 325

Applications:

• Side glue for soft cover books
• Spine glue for hard cover books
• graphic arts

Resources:

H7911334B

Versatile, semi pressure-sensitive hot melt offers excellent adhesion to polyethylene.

R&B  Softening Point (°F): 192

Viscosity (cps @ °F): 2,250 @ 350

Resouces

H2284-01

Medium viscosity PSA hot melt with high tack and peel. Can be applied by spray or extrusion.

R&B  Softening Point  (°F): 182

Viscosity (cps @ °F): 2,050 @ 325

Applications:

• General Assembly
• Garage Door insulation (EPS foam)

Resources:

H20053

PSA hot melt. Aggressive iwth good balance of tack, peel and shear. Medium viscosity. Improved SAFT over H2571B (183° F). Very light color..

R&B  Softening Point  (°F): 247
Viscosity (cps @ °F): 9,200 @ 350

Resources:

H2315-02

" Workhorse" product assembly hot melt pressure-sensitive adhesive wiht balanced peel, tack and shear strenght. Bonds well to foam, paper, corrugated, various films for automotive, RV, applicance, offic panels, plaques, carpet and trim attachements. SAFT is 206° F.

R&B  Softening Point (°F): 248

Viscosity (cps @ °F): 8,000 @ 375

Resources:

H2211

Versatile, high performance hot melt pressure-sensitive adhesive used widely for bonding trim, carpet, foam insulation or sound deadening materials to wood, ABS, other plastics and some metals. Sprayable. Wide temperature service range with SAFT at +196° F. high tack, high peel.

R&B  Softening Point  (°F): 250

Viscosity (cps @ °F): 7,900 @ 375

Resources:

HM7116

High performance polyester hot melt in granulated form. Relatively low viscosity for polyester.

R&B  Softening Point  (°F): 270

Viscosity (cps @ °F): 34,000 @ 392

Applications:

• Bonding wood
• Bonding textiles and vinyl films in product assembly

Resources:

HM4229

Versatile, high performance polyamide hot melt features low application viscosity, medium set speed, good resistance to oils and temperature service range from 0° F to 257° F. Pellet form. Amber in color.

R&B Softening Point  (°F): 275
Viscosity (cps @ ° F) : 3,500 @ 392

Applications:

• Product assembly
• Furniture assembly
• Automotive assembly
• Some PVC and vinyl bonding

Resouces:

HM4239S

Versatile, high performance polyamide product features very low application viscosity, slow setting, good oil resistance and  a temperature resistance of 239 °F (115°C). Applications include oil filter assembly, non-wovens construction and wood cabinet assembly. Also available in stick sizes/shapes for use in many handheld hot-melt guns.

R&B Softening Point  (°F): 275
Viscosity (cps @ ° F) : 3,480 @ 392

Resouces: