Bostik Hardwood Products

Bostik SL-150 Self Leveling Underlayment

SL-150™ is a high compressive strength, self-leveling, cement-based underlayment. It is used to repair, smooth and level concrete as well as existing ceramic, terrazzo or approved plywood sub-floors prior to the installation of carpet, vinyl, VCT, laminate, solid and engineered hardwood flooring, ceramic or natural stone. SL-150 is suitable for thickness from feather-edge to 1” thick; or up to 5” thick when mixed as designed with pea gravel. Use on, above or below grade. Use SL-150 in smaller installations where it may be mixed by hand; or use underlayment pump to quickly cover large jobs.

Resources:

VOC: 0 g/L

TDS   MSDS   LEED Compliance Letter

Installation Video

Fast Patch 102

Fast Patch 102 is a fast-setting, polymer-modified, cement-based compound. Simply mix with water to repair cracks and holes and uneven surfaces from feather edge up to 1/2" thick in a single application. Use Fast Patch 102 prior to installation of carpet, wood, ceramic tile and stone floors. It can be applied over concrete, existing ceramic tile, exterior grade plywood and well bonded vinyl tile.

Resources

VOC: 0 g/L
TDS   MSDS   LEED Compliance Letter

Bostik UltraFinish Portland Cement-Based Patch

Bostik UltraFinish is a fast-setting, latex-fortified, Portland cement-based patch for interior use prior to the installation of hardwood, ceramic, carpet, vinyl, or rubber flooring. This product may be used to skim coat or featheredge up to 1 inch deep in one application. Floor covering can be installed typically in as little as 15-10 minutes over concrete, wood, ceramic and quarry tile without the requirement of priming or the use of a liquid additive. When mixed with Durabond D-L16™ High Strength Additive of Bostik's Hydroment 425 Multi-Purpose Acrylic Latex Admixture instead of water, Bostik UltraFinish can be used as an embossing leveler.

This product contains Bostik's Blockade™ Antimicrobial Protection, which inhibits the growth of bacteria, mold, or mildew on the surface of the dried cement; the dried cement resists stains caused by mold.

Resources

TDS  MSDS

425 Multi-purpose Acrylic Latex Admixture

When  Hydroment 425 Multi-purpose Acrylic Latex Admixture™  is mixed into Fast Patch 102 cement based patch instead of water, not only is the performance and flexibility improved, but Fast Patch102 can also be used as an emboss leveler.

Available in 5 gallon, 2 gallon, 1 gallon, and quart containers.

ANSI Specifications:  A118.4, A118.6,  A118.7, A118.11

 

Resources

VOC: 0 g/L
TDS   MSDS  LEED Compliance Letter

Bostik Universal Primer

Designed for use with SL-150. Use over concrete, approved plywood substrates, cement backerboard, ceramic tile, marble, granite and terrazzo.

Resources

VOC: 15 g/L
TDS   MSDS   LEED Compliance Letter

MVP4® (Moisture Vapor Protection)

A one-part, trowel applied, elastomeric, moisture cure urethane membrane designed to:

1. Reduce Moisture Vapor Transmission from the sub floor.
2. Create a Noise Reduction Barrier over the Substrate, Peace   Noise Reduction
3. Establish and Anti-fracture Membrane that can Bridge Sub floor Cracks up to 1/8" pior to or after installation.
4. Contains Bostik Blockade Antimicrobial agent.

Resources

VOC: 126 g/L
TDS   MSDS   LEED Compliance Letter

Installation Video

Bostik EMC (Epoxy Moisture Coating)

A high performance, rapid drying, water-based, penetrating epoxy formulated to dramatically reduce moisture vapor transmission  and surface alkalinity from substrates including; "freshly-poured" concrete, cement backer board, radiant heat flooring, and cement based terrazzo prior to the installation of engineered or solid hardwood; carpet; vinyl/VCT; rubber; porcelain, marble, granite or ceramic tile floor covering. Bostik EMC is a low odor, non-flammable, two component system.

Resources

VOC: 67 g/L
TDS   MSDS   LEED Compliance Letter

Cork (Sound Control Underlayment)

This sound contol underlayment contains millions of air filled pockets per cubic inch, maiking it an ideal insulator of sound. Cork is an outstanding sound barrier for all types of flooring material including hardwood, natural stone, marble and ceramic tile.

Resources

VOC: 0 g/L
TDS      LEED Compliance Letter

Bostik's Ultra-Set® SingleStep™

Bostik's Ultra-Set® SingleStep™ is a one part-trowel applied tacking moisture cure urethane adhesive & moisture vapor protection membrane. This scientifically-formulated adhesive and membrane is very tenacious, has very low moisture permeability, and is formulated with patent pending
Thickness-Control™ Spacer Technology to insure proper membrane thickness between hardwood flooring and the substrate. Bostik's Ultra-Set SingleStep contains NO WATER, is 0-VOC and contains 1% recycled materials.

Resources

VOC: 0 g/L

TDS   MSDS  

Bostik's BEST

A one-part, trowel-applied, tacking moisture-cure, urethane adhesive; this advanced scientifically formulated adhesive does NOT contain water. Once cured, Bostik's Best is waterproof and isnot adversely affected by exposure to moisture or water; its superior properties provide a tough, flexible, tenacious bond to a variety of surfaces. Bostik's Best elastomeric characteristics allow the adhesive to move with the wood as it expands and contracts over the life of the floor.

Resources

VOC: 86 g/L
TDS   MSDS   LEED Compliance Letter

Installation Video

TKO Urethane (New and Improved) 0 VOC, 0 Solvent

Bostik's TKO is a one-part trowel applied moisture cure urethane; this advanced scientifically formulated adhesive does NOT contain water. Once cured, TKO is waterproof and is not adversely affected by exposure to moisture or water; its superior properties provide a tough, flexible, tenacious bond to a variety of surfaces. TKO's elastomeric characteristics allow the adhesive to move with the wood as it expands and contracts over the life of the floor.

A technical innovation in moisture-cure urethane adhesives that offers the following:

• Easy to Spread
• Holds a better ridge
• Cleans up faster when wet than most urethane adhesives
• Contains Blockade antimicrobial protection
• Zero Solvent
• Zero VOC (as calculated per SCAQMD 1168)

Resources

VOC: 0 g/L
TDS   MSDS   LEED Compliance Letter

BST Urethane

BST represents a breakthrough technology in urethane. This product offers the exceptional physical and chemical properties for a urethane. BST is a one-part, trowel applied, tacking moisture cure urethane with unsurpassed green strength and ridge holding capabilities. It trowels easily and, once cured, is not affected by moisture or water.

Resources

VOC: 72 g/L
TDS   MSDS   LEED Compliance Letter

EFA+ (Elastomeric Flooring Adhesive)

Bostik's EFA is a one-part, trowel applied, moisture cure urethane adhesive that does NOT contain water. Once cured, EFA is waterproof and is not adversely affected by exposure to moisture or water. EFA's elastomeric characteristics allow the adhesive to move with the wood as it expands and contracts over the life of the floor.

Resources

VOC: 88 g/L
TDS   MSDS   LEED Compliance Letter

HPL™ (High Performance Latex) Adhesive

Bostik® HPL™ Wood Flooring Adhesive is a high solids, extremely flexible, polymer-based adhesive formulated for the interior installation of engineered wood flooring and finger block parquet. This specially formulated adhesive has good early tack for immediate grab and quickly builds into a permanent but resilient bond. It is solvent free, very low VOC content, contains no hazardous chemicals is nonflammable, and meets all federal, state, and local governmental indoor air quality regulations. The use of HPL will contribute to LEED credit 4.1 for Low-Emitting Materials.

HPL may be used to adhere all dimensionally stable engineered, acrylic impregnated engineered and finger block parquet. HPL may be used over properly prepared substrates common to hardwood flooring installations including: properly prepared concrete, properly prepared cement terrazzo, plywood, particle or chip board (underlayment grade), cement backer board, and cement patch/ underlayments and properly prepared, primed gypsum underlayments with minimum design strength of 2000 psi.

Resources

VOC:   ‹11 g/L

TDS    MSDS   LEED Compliance Letter

Ultimate Adhesive Remover

Use Bostik's Ultimate Adhesive Remover to remove wet and cured urethane adhesive from the surface of the pre-finished (non-wax) wood flooring. Ultimate Adhesive Remover is a readily biodegradeable, low odor, water-rinseable solution.

Bostik's Ultimate Adhesive Remover is avaialbe in two formulations: liquid and pre-soaked, ready to use towels.

Resources

VOC: 0 g/L
TDS   MSDS-Towels  MSDS-Liquid 

LEED Compliance Letter

Bostik Wood Floor Cleaner

Bostik Wood Floor Cleaner cleans and shines all finished hardwood, laminate, stone and ceramic surfaces. Use Bostik's Wood Floor Cleaner everyday to safely clean all unwaxed flooring surfaces; finished polyurethane hardwood, laminates, ceramic and stone. It is specifically designed to be used with no need to dilute the packaged product.

Resources

VOC: 0 g/L
TDS   MSDS   LEED Compliance Letter

Hardwood Repair Kit

This rapid setting, two component polyurethane adhesive, is used to replace floor boards, repair hollow spots, and to install thresholds and mouldings. The adhesive has extremely high bond strength and flexibility, making it the perfect choice when bonding wood to wood, or wood to concrete.

Resources

VOC: xxx g/L
TDS   MSDS

7575 Epoxy System

This General Purpose two-component epoxy system is used for all applications that require fast cure time. The epoxy has extremely high bond strength and cures in 5 minutes.

Resources

VOC: xxx g/L
TDS   MSDS