Durabond Hardwood Products

DuraLevel 83P Self-Leveling Underlayment

83P™ is a high compressive strength, self-leveling, cement-based underlayment. It is used to repair, smooth and level concrete as well as existing ceramic, terrazzo or approved plywood subfloors prior to the installation of carpet, vinyl, VCT, laminate, solid and engineered hardwood flooring, ceramic or natural stone. 83P is suitable for thickness from featheredge to 1” thick, or up to 5” thick when mixed as designed with pea gravel. Use on, above or below grade. Use 83P in smaller installations where it may be mixed by hand; or use underlayment pump to quickly cover large jobs.

Resources

VOC: 0 g/L
TDS   MSDS

LEED Compliance Letter (with VOC Product Portfolio) 

Webcrete® 95 Portland Cement Patch

Webcrete 95 is a fast-setting, polymer-modified, cement-based compound. Simply mix with water to repair cracks, holes and uneven surfaces from featheredge up to 1/2" thick in a single application. Use Webcrete 95 prior to installation of carpet, wood, ceramic tile and stone floors. It can be applied over concrete, existing ceramic tile, exterior-grade plywood and well-bonded vinyl tile.

Resources

VOC: 0 g/L
TDS   MSDS   LEED Compliance Letter

Webcrete® Ultra Finish Premium Portland Cement Patch
For interior use only, a fast-setting, latex-fortified, Portland cement-based patch. This product may be used to skim coat or featheredge up to 1" deep in one application. Floor covering can be installed typically in as little as 15-20 minutes over concrete, wood, ceramic, and quarry tile without the requirement of priming or the use of a liquid additive. When mixed with Durabond D-L16 High Strength Additive instead of water, ULTRA FINISH can be used as an embossing leveler.

Resources

VOC: 0 g/L
TDS   MSDS   LEED Compliance Letter

Bostik UltraFinish™ Portland Cement-Based Patch

Bostik UltraFinish™ is a fast-setting, latex-fortified, Portland cement-based patch for interior use prior to the installation of hardwood, ceramic, carpet, vinyl, or rubber flooring. This product may be used to skim coat or featheredge up to 1" deep in one application. Floor covering can be installed typically in as little as 15-10 minutes over concrete, wood, ceramic and quarry tile without the requirement of priming or the use of a liquid additive. When mixed with Durabond D-L16™ High Strength Additive or Bostik's Hydroment 425 Multi-Purpose Acrylic Latex Admixture instead of water, Bostik UltraFinish can be used as an embossing leveler.

This product contains Bostik's Blockade™ Antimicrobial Protection, which inhibits the growth of bacteria, mold, or mildew on the surface of the dried cement; the dried cement resists stains caused by mold.

Resources

TDS   MSDS

Webcrete 98 Premium Portland Cement Patch

For interior use only, a premium fast-setting, latex-fortified Portland cement patch. May be used to skim coat or featheredge finishes up to 1/2" deep in one application. Floor covering can be installed in as little as one hour after application. Extremely flexible and resilient for patching and smoothing floors prior to the installation of ceramic, tile, carpet, resilient and wood flooring. The high concentration of polymer in Webcrete 98 enables the use of the product as an embossing leveler when mixed only with water.

Resources

VOC: 0 g/L
TDS MSDS LEED Compliance Letter

Bostik Universal Primer

Designed for use with SL-150. Use over concrete, approved plywood substrates, cement backer board, ceramic tile, marble, granite and terrazzo.

Resources

VOC: 15 g/L
TDS   MSDS   LEED Compliance Letter

D-288 Moisture Vapor Retarder

D-288 Moisture Vapor Retarder is a one-part, trowel-applied, elastomeric, anti-fracture urethane membrane formulated to reduce moisture vapor transmission from the subfloor, and bridge cracks up to 1/8" prior to the installation of engineered and solid hardwood flooring with D-332, D-321 and D-317 adhesives.  D-288 may be used over all substrates common to hardwood flooring installations, including concrete, plywood, particle, or chip board (underlayment grade), well-bonded vinyl, ceramic tile, cement backer board, cement patches/underlayments, radiant head flooring and terrazzo.

Resources

VOC: 126 g/L
TDS   MSDS   LEED Compliance Letter

D-261 Extreme Moisture Vapor Barrier Coating

D-261 Extreme Moisture Vapor Barrier Coating is a two-component, penetrating epoxy formulated to dramatically reduce moisture vapor transmission from substrates, including "freshly poured green concrete," properly-prepared concrete, cement backer board, cement patch underlayments, radiant heat flooring, and cemet-based terrazzo. Reduces moisture vapor transmission from substrates with Moisture Vapor Emission Rates as high as 25 lbs. with one coat.

Resources

VOC: 59 g/L
TDS   MSDS   LEED Compliance Letter

D-250 Moisture Vapor Barrier Coating

A high-performance, rapid-drying, water-based, penetrating epoxy formulated to dramatically reduce moisture vapor transmission  and surface alkalinity from substrates including "freshly-poured" concrete, cement backer board, radiant heat flooring, and cement-based terrazzo prior to the installation of engineered or solid hardwood, carpet; vinyl/VCT, rubber; porcelain, marble, granite or ceramic tile floor covering. Bostik EMC is a low-odor, non-flammable, two-component system.

Resources

VOC: 67 g/L
TDS   MSDS   LEED Compliance Letter

Installation Video

Cork Sound Control Underlayment

This sound control underlayment contains millions of air-filled pockets per cubic inch, making it an ideal insulator of sound. Cork is an outstanding sound barrier for all types of flooring material including hardwood, natural stone, marble and ceramic tile.

Resources

VOC: 0 g/L
TDS   MSDS   LEED Compliance Letter

D-332 Premium Wood Flooring Adhesive

Durabond® D-332™ Premium Wood Flooring Urethane Adhesive is a one-part, trowel-applied, tacking, moisture-cure urethane adhesive; this advanced, scientifically-formulated adhesive does NOT contain any water. Once cured, D-332 is waterproof and is not adversely affected by exposure to moisture or water; its superior properties provide a tough, flexible, tenacious bond to a variety of surfaces. D-332's elastomeric characteristics allow the adhesive to move with the wood as it expands and contracts over the life of the floor.

Resources

VOC: 86 g/L
TDS   MSDS   LEED Compliance Letter

Installation Video

D-321 Moisture Cure Urethane Wood Flooring Adhesive (New / Improved) 0-VOC, 0-Solvent

D-321 is a one-part, trowel-applied, moisture-cure urethane; this advanced, scientifically-formulated adhesive does NOT contain water. Once cured, D-321 is waterproof and is not adversely affected by exposure to moisture or water; its superior properties provide a tough, flexible, tenacious bond to a variety of surfaces. D-321's elastomeric characteristics allow the adhesive to move with the wood as it expands and contracts over the life of the floor.

A technical innovation in moisture-cure urethane adhesives that offers the following:

• Easy to spread
• Holds a better ridge
• Cleans up faster when wet than most urethane adhesives
• Contains Bostik's Blockade™ antimicrobial protection
• 0-Solvent
• 0-VOC (as calculated per SCAQMD 1168)

Resources

VOC: 0 g/L
TDS   MSDS   LEED Compliance Letter

D-317 Elastomeric Wood Flooring Adhesive

D-317™ Engineered Wood Flooring Adhesive is a one-part, trowel-applied, moisture-cure urethane adhesive; this advanced, scientifically-formulated adhesive does NOT contain any water. Once cured, D-317 is waterproof and is not adversely affected by exposure to moisture or water; its superior properties provide a tough, flexible, tenacious bond to a variety of surfaces. D-317’s elastomeric characteristics allow the adhesive to move with the wood as it expands and contracts over the life of the floor.

Resources

VOC: 88 g/L
TDS   MSDS   LEED Compliance Letter

Durabond Urethane Adhesive Remover

Durabond® Urethane Adhesive Remover is a readily-biodegradable, low-odor, water-rinseable solution. Use Durabond Urethane Adhesive Remover to remove wet and cured urethane adhesive from the surface of pre-finished (non-wax) wood flooring.

Resources

VOC: 0 g/L
TDS   MSDS   LEED Compliance Letter

Hardwood Repair Kit

This rapid-setting, two-component, polyurethane adhesive is used to replace floor boards, repair hollow spots, and install thresholds and moldings. The adhesive has extremely high bond strength and flexibility, making it the perfect choice when bonding wood to wood, or wood to concrete.

TDS  MSDS

7575 Epoxy System

This general purpose, two-component epoxy system is used for all applications that require fast cure time. The epoxy has extremely high bond strength and cures in 5 minutes.

TDS   MSDS