Durabond Ceramic Products

DuraLevel® 83P™ Self-Leveling Underlayment

83P™ is a high compressive strength, self-leveling, cement-based underlayment. It is used to repair, smooth and level concrete as well as existing ceramic, terrazzo or approved plywood subfloors prior to the installation of carpet, vinyl, VCT, laminate, solid and engineered hardwood flooring, ceramic or natural stone. 83P is suitable for thickness from featheredge to 1” thick, or up to 5” thick when mixed as designed with pea gravel. Use on, above or below grade. Use 83P in smaller installations where it can be mixed by hand; or use underlayment pump to quickly cover large jobs.

Resources

VOC: 0 g/L

TDS   MSDS   LEED Compliance Letter

Webcrete® 95 Portland Cement Patch

A fast-setting, polymer-modified, cement-based compound. Simply mix with water to repair cracks, holes and uneven surfaces from featheredge up to 1/2" thick in a single application. Use Webcrete 95 prior to installation of carpet, wood, ceramic tile and stone floors. It can be applied over concrete, existing ceramic tile, exterior-grade plywood and well-bonded vinyl tile.

Resources

VOC: 0 g/L

TDS   MSDS   LEED Compliance Letter

Webcrete® Ultra Finish Premium Portland Cement Patch

Webcrete Ultra Finish is a fast-setting, latex-fortified, Portland Cement Patch for interior use. This product can be used to skim coat or featheredge up to 1" deep in one application. Floor Covering can be installed typically in as little as 15-20 minutes over concrete, wood, ceramic, and quarry tile without the requirement of priming or the use of a liquid additive. When mixed with Durabond D-L16 High Strengh Additive instead of water, UltraFinish can be used as an embossing leveler. UltraFinish contains Bostik's Blockade™ antimicrobial protection.

Resources

VOC: 0 g/L

TDS   MSDS   LEED Compliance Letter

Bostik UltraFinish Portland Cement-Based Patch

Bostik® UltraFinish™ is a fast-setting, latex-fortified, Portland cement-based patch for interior use prior to the installation of hardwood, ceramic, carpet, vinyl, or rubber flooring. This product can be used to skim coat or featheredge up to 1" deep in one application. Floor covering can be installed typically in as little as 15-10 minutes over concrete, wood, ceramic and quarry tile without the requirement of priming or the use of a liquid additive. When mixed with Durabond D-L16™ High Strength Additive or Bostik's Hydroment 425 Multi-Purpose Acrylic Latex Admixture instead of water, Bostik UltraFinish can be used as an embossing leveler.

This product contains Bostik's Blockade™ Antimicrobial Protection, which inhibits the growth of bacteria, mold, or mildew on the surface of the dried cement; the dried cement resists stains caused by mold.

Resources

VOC: 0 g/L

TDS  MSDS   LEED Compliance Letter

Webcrete® 98 Premium Portland Cement Patch

A premium, fast-setting, latex-fortified, Portland cement patch for interior use. Webcrete 98 can be used to skim coat or featheredge finishes up to 1/2" deep in one application. Floor covering can be installed in as little as an hour after application. Webcrete 98 is extremely flexible and resilient for patching and smoothing floors prior to the installation of ceramic tile, carpet, resilient and wood flooring.

Resources

VOC: 0 g/L

TDS   MSDS   LEED Compliance Letter

Natural Cork Sound Control Underlayment

This sound contol underlayment contains millions of air-filled pockets per cubic inch, making it an ideal insulator of sound. Cork is an outstanding sound barrier for all types of flooring material including hardwood, natural stone, marble and ceramic tile.

Resources
VOC: 0 g/L

TDS

Universal Primer

Bostik Universal Primer is designed for use with SL-150. Use over concrete, approved plywood substrates, cement backer board, ceramic tile, marble, granite and terrazzo.

Resources

VOC: 15 g/L

TDS   MSDS   LEED Compliance Letter

D-222 DuraGuard™

A ready-to-use, latex waterproofing and antifracture membrane for use beneath thin-set ceramic tile installations on vertical and horizontal surfaces. Use D-222 DuraGuard in commercial or residential applications. Apply over concrete, cement block walls, cement backer board, gypsum board, exterior-grade plywood (interior, dry installations only) and mortar beds. Dries in one to three hours. Cleans up with water.

Resources

VOC: 12.5 g/L
ANSI Specifications: A118.10, A118.12

TDS   MSDS   LEED Compliance Letter

 

D-70™ ProFlex

D-70™ ProFlex Mortar is a high-performance, extremely flexible, multipurpose, latex-modified thin-set mortar, used for interior or exterior installations to set porcelain, glass, ceramic, granite, slate, marble, limestone and dimension stone tiles. Use over properly-prepared concrete; structurally-sound, exterior-grade plywood (interior/dry use only); cementitious backer board; Durabond D-222 DuraGuard; existing, well-bonded vinyl/VCT or ceramic tile; cutback adhesive residue (dry only) and floors equipped with radiant heat. Contains Bostik's Blockade™ Antimicrobial Protection.

Resources

VOC: 0 g/L
ANSI Specificaitons: A118.4, A118.11

TDS   MSDS   LEED Compliance Letter

D-65™ High Performance & Non Sag Mortar

D-65 is for interior or exterior, commercial or residential installations to set all types of porcelain, Saltillo, ceramic, granite, slate, marble, limestone, dimension stone and glass tiles. D-65 is formulated to prevent large-bodied ceramic, porcelain and stone tiles from slipping in vertical applications. D-65 is also suitable for installing floor tiles.

• Easy to spread
• Excellent for use on all approved floors and walls
• For interior and exterior jobs
• High compressive strength for extra heavy tile

Resources

VOC: 0 g/L
ANSI Specifications:  A118.1, A118.4, A118.11

TDS   MSDS   LEED Compliance Letter

D-60™ Medium-Set

D-60 Medium Set is a premium, latex-modified, medium-set mortar used for all interior or exterior installations to set all large-sized ceramic, porcelain, granite, slate, marble, limestone and dimension stone tiles. Use over properly-prepared concrete; structurally-sound, exterior-grade plywood (interior/dry use only); cementitous backer board; D-222;  and existing, well-bonded vinyl/VCT or ceramic tile.

• Helps prevent lippage between large tiles
• Use from 1/8" to 3/4" thick
• Use for all tile and stone (except moisture-sensitive marble)

Resources

VOC: 0 g/L
ANSI Specifications: A118.4, A118.11

TDS   MSDS   LEED Compliance Letter

D-55 Fast Set

D-55 Fast-Set is a premium, latex-modified, fast-setting mortar used for interior or exterior installations to set ceramic, porcelain, granite, slate, marble, limestone, and dimension stone tiles. Use over properly-prepared concrete; structurally -sound, exterior-grade plywood (interior/dry use only); cementitious backer board; D-222 Durabguard; and all existing, well-bonded vinyl/VCT or ceramic tile.

• Use where downtime must be minimized
• Use as a fast-setting "thin set" or medium-bed"
• Set and grout in same day
• Mix with D-L16 for premium setting characteristics.

Resources

VOC: 0 g/L
ANSI Specifications:  A118.4, A118.11

TDS  MSDS  LEED Compliance Letter

D-50™ Flexible Mortar

D-50 is used for interior or exterior installations to set ceramic, porcelain, granite, slate, marble, limestone, and dimension stone tiles. Use over properly-prepared concrete; structurally-sound, exterior-grade plywood (interior/dry use only); cementitious backer board; D-222 DuraGuard; and existing, well-bonded vinyl/VCT or ceramic tile.

Resources

VOC: 0 g/L
ANSI Speicificaitons: A118.4, A118.11

TDS MSDS LEED Compliance Letter

D-40™ DuraFlex™

D-40 DuraFlex is a multi-purpose, latex-modified mortar used for interior or exterior installations to set ceramic, porcelain, granite, slate, marble, limestone, and dimension stone tiles. Use over properly-prepared concrete; structurally-sound, exterior-grade plywood (interior dry/use only); cementitious backer board; D-222 DuraGuard; and existing, well-bonded vinyl/VCT or ceramic tile.

Resources

VOC: 0 g/L
ANSI Specifications: A118.4 , A118.11

TDS MSDS LEED Compliance Letter

D-25™ DitraSet

D-25 DitraSet Thin Set Mortar is composed of select, proprietary chemicals, carefully-graded aggregates, inorganic adhesion promoters, and purified cements. It provides outstanding workabliltiy, excellent durability, and superior bond strengths in interior and exteior applications when used in conjuction with the Schluter-DITRA uncoupling membrane and Schluter- KERDI waterproofing membrane. Use D-25 DitraSet to install membranes over substrates approved by Schluter-Systems and to set ceramic, porcelain, and stone tile over SchluterDITRA and Schluter-KERDI.

Resources

VOC: 0 g/L
ANSI Specifications:  A118.1, A118.4, A118.11

TDS  MSDS LEED Compliance Letter

D-20™ Porcelain Set

D-20 Porcelain Set is for interior or exterior installations to set all types of ceramic, porcelain, granite, slate, marble, limestone, and dimension stone tiles. Use over properly-prepared concrete, cement backer board, cured mortar beds, brick cement block and D-222 DuraGuard.

Resources

VOC: 0 g/L
ANSI  Specificaitons:  A118.1, A118.4

TDS MSDS LEED Compliance Letter

D-5™ Premium

D-5 Premium Thin Set Mortar is for interior or exterior installations to set all types of ceramic, porcelain, granite, slate, marble, limestone, and dimension stone tiles. Use over properly-prepared concrete, structurally-sound, exterior-grade plywood (interior/dry use only); cementitious backer board; Durabond D-222 DuraGuard; and existing, well-bonded vinyl/VCT or ceramic tile.

• Suitable for exterior when mixed with D-L16 Admixture

Resources

VOC: 0 g/L
ANSI Specifications:  A118.1, A118.4, A118.11

TDS  MSDS  LEED Compliance Letter

D-2™ Floor Grade

D-2 Floor Grade Thin Set Mortar is for interior and exterior installations to set all types of ceramic, porcelain, granite, slate, marble, limestone, and dimension stone tiles. Use over properly -prepared concrete, structurally-sound, exterior-grade plywood (interior/dry use only); cementitious backer board, D-222 DuraGuard; and existing, well-bonded vinyl/VCT or ceramic tile.

Resources

VOC: 0 g/L
ANSI Specifications:  A118.1, A118.4

TDS  MSDS  LEED Compliance Letter

D-L16™ Acrylic Latex Admixture

Designed as an admixture to be used instead of water for thin-set and ceramic grouts. Provides improved shear bonds and compressive strengths, frost resistance and stain resistance.

• Use with Durabond® thin-set mortar products D-20™ Porcelain Set, D-25™ DitraSet , D-5™ Premium Mortar, and D-2™ Floor Grade Thin-Set Mortar for exterior installations, porcelain tile, over plywood subfloors, or over D-222™ Duraguard.
• Use with Durabond® Fortified Tile Grouts to improve bond to porcelain tile, to add flexibility, and for installations in freeze/thaw environments.
• Use to prepare Portland cement bond coats and mortar beds.

Resources

VOC: 0 g/L
ANSI Specifications: A118.1, A118.4

TDS  MSDS  LEED Compliance Letter

D-2001™ Multi-purpose Mastic

D-2001 is America's #1 superior performance, contractor-preferred mastic. Use for installation of ceramic tile and natural stone tile on interior walls and floors. Performs best on areas with intermittent water exposure.

• Excellent sag resistance
• Easy to trowel
• Use for large red & white body ceramic tiles
• Excellent for most marble

Resources

VOC: 123 g/L
ANSI Specification:  A136.1

TDS MSDS

D-1001™ Floor & Wall Mastic

Use for installation of ceramic tile and natural stone tile on interior walls and floors.

• Excellent sag resistance
• Easy to trowel

Resources

VOC: 123 g/L
ANSI Specifications:  A136.1

TDS  MSDS

D-501™ Commercial Grade Mastic

Use for installation of ceramic tile and natural stone tile in interior walls and floors.

• Excellent sag resistance
• Easy to trowel
• For residential and commerical construction as well as intermittent water exposure

Resouces

VOC: 123 g/L
ANSI Specificaitons:  A136.1

TDS MSDS

Durabond® Fortified Tile Grout (Sanded)

Use Durabond Fortified Tile Grout (sanded) for all types of ceramic mosaic, porcelain, granite, cultured marble, dimension stone and structural glazed tile where joint width is 1/8" to 1 1/2". Fortified Tile Grout is available in 40 popular colors.

• Heavy duty, high compressive strength
• Latex-fortified
• Fast-setting
• No shrinkage

Resources

VOC: 0 g/L
ANSI Specifications:  A118.6

TDS     MSDS     

LEED Compliance Letter

Grout Coverage Chart    Coverage Calculator

Color Chart

Durabond® Fortified Tile Grout (Unsanded)

Use Durabond Fortified Tile Grout (unsanded) to grout any type of tile or natural stone with joints up to 1/8".  

• Interior/exterior
• Fast-setting
• Excellent workability

Resources

VOC: 0 g/L
ANSI Specifications:  A118.6

TDS     MSDS    LEED Compliance Letter

Grout Coverage Chart    Coverage Calculator

Color Chart

TruColor Pre-Mixed Grout

Bostik® TruColor™ Pre-Mixed Grout is a patented,
water-based, urethane grout offering the ultimate in color accuracy, stain protection and crack resistance for
residential and commercial tile installations. This breakthrough formulation installs up to 50% faster than traditional grouts, and never needs to be sealed. Its perfect balance of flexibility and toughness enables it to exhibit unmatched performance and crack resistance. TruColor exceeds the grout-relevant portion of the ANSI 118.3 epoxy standard (modified ANSI 118.3 –UG).

Available in 18 lb and 9 lb containers.

ANSI Specifications:  A118.3

Resources

VOC: 35 g/L

TDS  MSDS   LEED Compliance Letter

TDS Spanish   TDS French

Watch this Video

Colors

EzPoxy™ Grout & Mortar

EzPoxy is a 100% Solids Epoxy and Grout Mortar for interior or exterior, vertical or horizontal installations. Typical applications include commercial and residential kitchens, lobbies, bathrooms, fast food restaurants, breweries, wineries, factories, shopping malls, meat processors, and distilleries.

Resources

VOC: 0 g/L
ANSI Specifications:  A118.3

TDS     MSDS   LEED Compliance Letter

D-190™ DuraPoxy™

D-190 DuraPoxy Epoxy Modified Grout and Mortar Admixture, when mixed with Durabond Fortified Tile Grout (sanded only), is for interior and exterior installations to set and/or grout all ceramic, porcelain, quarry, slate, marble, limestone, and dimension stone tiles. Exceeds ANSI A118.8.

Resources

VOC: 0 g/L
ANSI Specifications:  A118.8

TDS     MSDS  LEED Compliance Letter