Hydroment Ceramic Products

For use over concrete, cement block, cement backer boards, Dens Shield, gypsum wallboard, veneer plaster. Exceeds requirements of ANSI A136.1 (Type 1 & 2) mastics.

Available in 3.5 Gallon and 1 gallon containers.

ANSI Specifications:  A136.1

For setting all types of ceramic and porcelain, granite, slate, marble, limestone, and dimensional stone tiles. Use over properly-prepared concrete, cement, backer board, cured mortar beds, brick and cement block.

Available in 50 lbs. bags.

ANSI Specifications:  A118.1,  A118.4

Composed of select proprietary chemicals, carefully graded aggregates, inorganic adhesion promotora and purified cements. Provides outstanding workability, excellent durability, and superior bond strengths in interior and exterior applications when used in conjunction with Schluter-DITRA uncoupling membrane over substrates approved by the Schluter Systems and to set ceramic, porcelain and stone tile of Schluter-DITRA.

Available in 50 lb. bags.

ANSI Specifications:  A118.1, A118.4*,  A118.11*

*mixed with 425 Multi-Purpose Acrylic Latex Admixture or 447 Flex-A-lastic

(718 White / 918 Gray)

Use ReFlex for the toughest residential and commercial applications, deflection up to 1/240, difficult tile such as porcelain, or for any job that requires an extremely high performance thin-set.

ReFlex is suitable for setting porcelain, ceramic tile and stone tile in both interior and exterior applications. ReFlex is recommended for installing tile over plywood, backer board, and approved waterproofing/crack isolation membranes and existing ceramic and vinyl flooring. Mix with water only.

ANSI Specifications: A118.4,  A118.11

Available in 50 lb. bags.

(913 White / 973 Gray)

Single-Flex™ F.S.™ is a rapid-setting, multi-purpose, latex-modified, thin-set mortar. Use Single-Flex F.S. where there are limited downtime concerns, or to set and grout tile in the same day.

Mix Single-Flex F.S. with water or 425 Multi-Purpose Acrylic Latex Admixture for improved bond strength and flexibility.

Single-Flex F.S. is suitable for setting porcelain, ceramic tile and stone tile in both interior and exterior applications. It is recommended for installing tile over plywood, backer board and approved waterproofing/crack isolation membranes and existing ceramic and vinyl flooring.

For added convenience, Single-Flex F.S. is available in 25 and 50 lb. bags

ANSI Specifications: A118.4,  A118.11

(716 White / 916 Gray)

Single-Flex™ is suitable for setting porcelain, ceramic tile and stone tile in both interior and exterior applications. Single-Flex is recommended for installing over plywood, backer board and approved waterproofing/crack isolation membranes, as well as existing ceramic and vinyl flooring. Mix only with water.

Available in 50 lb. bags.

ANSI Specifications: A118.4,  A118.11

Fast Patch 102 is a fast-setting, polymer-modified, cement-based compound. Simply mix with water to repair cracks, holes and uneven surfaces from feather-edge up to 1/2" thick in a single application. Use Fast Patch 102 prior to installation of carpet, wood, ceramic tile and stone floors. It can be applied over concrete, existing ceramic tile, exterior-grade plywood and well-bonded vinyl tile.

Bostik Universal Primer is designed for use with SL-150. Use over concrete, approved plywood substrates, cement backer board, ceramic tile, marble, granite and terrazzo.

Black-Top™ 90210 is a liquid-applied, fabric-reinforced waterproofing and crack isolation membrane. Black-Top 90210 may be used for both heavy duty and residential applications.

Use in commercial kitchens, pools, showers, fountains, spas, hospitals, schools, malls, airports, etc.

Applies as easy as paint. Dries in 2-4 hours; minimal thickness does not add elevation.

Exceeds the requirements of ANSI A118.10.

From Bostik, a 100% RTV-curing Silicone Caulking that is waterproof and permanently flexible.

As a Caulk:  Use in tub surrounds to seal drains, fixtures, and plumbing penetrations.

As an Adhesive:  Use as an adhesive or bedding compound for countertops, soap dishes, and thresholds. Pure Silicone Caulking is highly chemical resistant and can withstand temperatures to 400°F.

Available in Clear and White, sold in 10.1 oz. caulking cartridges.

Bostik Blaze™ Urethane Grout and General Purpose Cleaner is an effective way to clean tile surfaces after installing urethane based grouts. It can be used to remove haze which may remain after urethane grout installation and, in its diluted form, is an excellent routine tile floor cleaner.

While urethane grout is typically easy to clean off the surface of most tiles, some surfaces create challenges that make it necessary to use a chemical-based cleaner to remove residual urethane film or haze. Surfaces that are more difficult to clean that will benefit from the use of Blaze include high gloss surfaces, through-body porcelains and etched/frosted glass.

Blaze is safe to use on ceramic and porcelain tile, natural stone such as marble, granite, limestone, travertine,sandstone, flagstone, masonry, concrete,
metal and glass tile.

• Effectively Removes Urethane Grout Haze
• Excellent General Purpose Tile Cleaner
• Compatible With All Tile Surfaces

MSDS (http://msds.bostik-us.com)

Dimension™ Reflective, Pre-Mixed Urethane Grout is a patented, glass filled, ready-to-use, water based, urethane grout. Dimension contains micro glass beads and a translucent, urethane binder that both reflect light as well as allow it to pass through. This creates a unique reflective appearance in all tile installations as well as a three dimensional effect within glass tile installations.

Applications include interior and exterior installation of ceramic, porcelain, glass, metal and natural stone tiles on floors and walls. It can be used in horizontal (floor) grout joint widths from 1/16” to 1/2” and vertical (wall) grout joints from 1/16” to 1/4”.

Designed for residential and commercial applications, Dimension offers lifetime stain resistance* and superior crack resistance. It contains built-in urethane sealer technology, so it never needs to be sealed and is ideal for use in heavy traffic areas as well as wet/submerged
environments.

Dimension contains Bostik’s Blockade™ antimicrobial protection, which inhibits the growth of bacteria, mold, and mildew on the surface of cured grout and enables it to resist stains caused by mold.

Dimension is a technology engineered to appeal to today’s green-conscience marketplace, specifically those seeking to obtain U.S. Green Building Council LEED® certification for their projects. It contains 80% post-consumer, recycled glass and its unique combination of features produces one-of-a-kind specification potential for architects and designers.

• Unique reflective appearance
• No sealing required ever!
• No color fading, streaking or shading – even when wet!
• Crack-resistant flexibility
• Stain resistant*
• Fast, easy installation – installs up to 50% faster than other grouts
• Excess product can be saved and used later (when stored properly in original container)
• UV stable – colors will not yellow or darken
• Bostik’s Blockade™ antimicrobial protection
• Dust-free mixing
• 3 hour working time
• Easy water clean-up
• Non-sag formula ideal for vertical surfaces
• May contribute to USGBC LEED® Credits: MR 4.1 & 4.2 (Recycled Content), and EQ 4.1 (Low-Emitting Materials)
• Does not exhibit efflorescence

Bostik® Dry Tile Grout (unsanded) is formulated from select grades of ground quartz, portland cement, colorfast pigments and other special proprietary ingredients. Bostik grout provides superior hardness, consistent uniform color, strength and durability with a wide variety of tiles.  Exceeds ANSI A118.6 when mixed with water and A118.7 when mixed with Bostik® 425 Multi-Purpose Acrylic Latex Additive™.

Bostik Dry Tile Grout (unsanded) may be used for grouting glazed wall tile, marble or granite.  Use Dry Tile Grout for grouting floors and walls whenever grout joint widths are less than 1/8”.

Benefits include:

• High early strengths
• Fast setting
• Non-shrinking
• Low Absorption
• Easy Clean-up

MSDS (http://msds.bostik-us.com)

QuartzLock2™ is a pre-mixed, ready-to-use urethane and colored quartz-based grout for ceramic, porcelain, glass and natural stone tiles on floors and walls. QuartzLock2 Grout requires no sealing and is resistant to typical food stains and most household chemical products.