Follow us!
Watch
June 22, and July 5th
Durabond Ceramic Products
Surface Preparation
Bostik UltraFinish™ is a fast-setting, latex-fortified, Portland cement-based patch for interior use prior to the installation of hardwood, ceramic, carpet, vinyl, or rubber flooring. This product may be used to skim coat or feather-edge up to 1" deep in one application. Floor covering can be installed typically in as little as 15-20 minutes over concrete, wood, ceramic and quarry tile without the requirement of priming or the use of a liquid additive. When mixed with Durabond D-L16™ High Strength Additive or Bostik's Hydroment 425 Multi-Purpose Acrylic Latex Admixture instead of water, Bostik UltraFinish can be used as an embossing leveler.
This product contains Bostik's Blockade™ Antimicrobial Protection, which inhibits the growth of bacteria, mold, or mildew on the surface of the dried cement; the dried cement resists stains caused by mold.
Webcrete® 95 is a fast-setting, latex-fortified, Portland cement patch for interior use. Webcrete 95 may be used to skim coat or feather-edge finish up to 1/2” deep in one application. Floor covering can be installed in as little as an hour after application. Webcrete 95 is extremely flexible and resilient for patching and smoothing floors prior to the installation of ceramic tile, carpet, resilient and wood flooring. When mixed with D-L16 instead of water, not only is the performance and flexibility improved, but Webcrete 95 can also be used as an embossing leveler.
SL-150™ is a high compressive strength, self-leveling, cement-based underlayment. It is used to repair, smooth and level concrete as well as existing ceramic, terrazzo or approved plywood sub-floors prior to the installation of carpet, vinyl, VCT, laminate, solid and engineered hardwood flooring installation, ceramic or natural stone. Suitable for thicknesses from feather-edge to 1” thick, or up to 5” thick when mixed as designed with pea gravel. Use on, above, or below grade. Use SL-150 in smaller installations where it may be mixed by hand, or use underlayment pump to quickly cover large jobs.
Specialty Products
Bostik® Tub & Tile Caulk is an orderless, one-part, self-curing, acrylic latex caulk which provides a flexible seal that bonds to most common household surfaces. Tub and tile caulks are designed to complement all Bostik grout colors. Available in 10.1 oz. cartridges (6/case).
- Mold & mildew resistant
- Flexible
- Water cleanable
Bostik Blaze™ Urethane Grout and General Purpose Cleaner is an effective way to clean tile surfaces after installing urethane based grouts. It can be used to remove haze which may remain after urethane grout installation and, in its diluted form, is an excellent routine tile floor cleaner.
While urethane grout is typically easy to clean off the surface of most tiles, some surfaces create challenges that make it necessary to use a chemical-based cleaner to remove residual urethane film or haze. Surfaces that are more difficult to clean that will benefit from the use of Blaze include high gloss surfaces, through-body porcelains and etched/frosted glass.
Blaze is safe to use on ceramic and porcelain tile, natural stone such as marble, granite, limestone, travertine,sandstone, flagstone, masonry, concrete,
metal and glass tile.
- Effectively Removes Urethane Grout Haze
- Excellent General Purpose Tile Cleaner
- Compatible With All Tile Surfaces
Grouts & Epoxies
Bostik® TruColor™ Pre-Mixed Grout is a patented, water-based, urethane grout offering the ultimate in color accuracy, stain protection and crack resistance for residential and commercial tile installations. This breakthrough formulation installs up to 50% faster than traditional grouts, and never needs to be sealed. Its perfect balance of flexibility and toughness enables it to exhibit unmatched performance and crack resistance. TruColor exceeds the grout-relevant portion of the ANSI 118.3 epoxy standard (modified ANSI 118.3 –UG).
Available in 18 lb and 9 lb containers.
ANSI Specifications: A118.3
*NOTE—FOR COLOR SELECTION: The "Bostik Grout & Sealant Color Selector Card" (T2) is the standard for color correction, manufacturing and quality control. Colors may vary due to jobsite conditions, absorption of tile, mixiing ratios, installation methods or from batch to batch, and therefore may differ significantly from the Grout & Sealant Color Selector Card. White and Natural do not contain color pigments and therefore do not have color standards.
TruColor Pre-Mixed Grout Colors *
, 
Dimension™ Reflective, Pre-Mixed Urethane Grout is a patented, glass filled, ready-to-use, water based, urethane grout. Dimension contains micro glass beads and a translucent, urethane binder that both reflect light as well as allow it to pass through. This creates a unique reflective appearance in all tile installations as well as a three dimensional effect within glass tile installations.
Applications include interior and exterior installation of ceramic, porcelain, glass, metal and natural stone tiles on floors and walls. It can be used in horizontal (floor) grout joint widths from 1/16” to 1/2” and vertical (wall) grout joints from 1/16” to 1/4”.
Designed for residential and commercial applications, Dimension offers lifetime stain resistance* and superior crack resistance. It contains built-in urethane sealer technology, so it never needs to be sealed and is ideal for use in heavy traffic areas. Dimension contains Bostik’s Blockade™ antimicrobial protection, which inhibits the growth of bacteria, mold, and mildew on the surface of cured grout and enables it to resist stains caused by mold.
Dimension is a technology engineered to appeal to today’s green-conscience marketplace, specifically those seeking to obtain U.S. Green Building Council LEED® certification for their projects. It contains 80% post-consumer, recycled glass and its unique combination of features produces one-of-a-kind specification potential for architects and designers.
Watch the Dimension Installation Video on 
A two-component epoxy admixture designed to be mixed with Bostik® Ceramic Tile Grout (Sanded ONLY—except WHITE).
Bostik® 1900™ creates a modified epoxy grout and setting mortar with exceptional stain resistance and tenacious adhesion—all with workability like a traditional Portland cement grout or mortar.
The Bostik 1900 System (Part A & Part B) exceeds the requirements of ANSI A118.8 for modified epoxy grout and mortar. Use Bostik 1900 for grouting ceramic tile, porcelain tile, quarry tile, brick pavers, slate, marble, granite and structural glazed block wherever a high resistance to staining is required.
ANSI Specifications: A118.
Membranes
Bostik® GoldPlus™ is a ready-to-use, roller-applied, latex waterproofing and anti-fracture membrane for use beneath thin set ceramic tile installations on vertical and horizontal surfaces. GoldPlus exceeds the requirements of ANSI A118.10 (specification for waterproof membranes beneath thin set tile and stone) and ANSI A118.12 specification for crack isolation membranes. Use GoldPlus in commercial or residential applications. Apply over concrete, cement block walls, cement backer board, exterior grade plywood (interior, dry installations only) and mortar beds.
This product contains Bostik’s Blockade™ antimicrobial protection, which inhibits the growth of bacteria, mold or mildew on the surface of the dried membrane; the dried membrane resists stains caused by mold.
- Roller-applied for easy application
- Exceeds ANSI A118.10 and A118.12 waterproofing and crack isolation specifications
- 1-hour drying time for fast installation
- LEED compliant: Low odor, low VOC formulation
- Bostik’s Blockade™ antimicrobial protection
- 24-hour flood test for a shorter installation process
Moisture Vapor Barrier Coatings
D-261™ Extreme Moisture Vapor Barrier Coating is a two-component, high performance, rapid drying, epoxy formulated to dramatically reduce moisture vapor transmission and surface alkalinity from substrates including; “freshly-poured/green concrete”, properly prepared concrete, cement backer board, cement patch/underlayments, radiant heat flooring, and cement-based terrazzo prior to the installation of carpet; vinyl/VCT; engineered or solid hardwood; porcelain, marble, granite, or ceramic tile floor covering. D-261 contains Bostik’s Blockade™ antimicrobial protection and utilizes a breakthrough, silver-based, antimicrobial agent that provides built in protection to inhibit the growth of a broad range of odor causing bacteria, mold and mildew on the surface of the coating’s film. D-261 is uniquely formulated so that it may be applied to fresh “green” concrete as soon as it has achieved “initial set” (when the concrete can be walked on without disturbing the surface). It is pigmented light green for visual indication of coverage and film thickness during the installation process. It is extremely durable and wear resistant.
When properly installed, D-261 is designed to reduce the moisture vapor emission rate of even the most challenging concrete slabs from < 25 pounds per 1,000 ft2 per 24 hours to < 3 lbs. per 1,000 ft2 per 24 hours (per ASTM 1869). This non-flammable, non corrosive, low odor, non-blushing formulation requires no solvent wiping, and has no application window in which floor covering adhesives must be applied to achieve a strong bond. D-261 is formulated to be effective in reducing the surface alkalinity of concrete slabs to pH levels of 9 or lower as recommended by the Carpet and Rug Institute and the Canadian Carpet Institute, making them ideal for bonding with most adhesives.
