Home > Markets > Flooring > Carpet Vinyl Patch Products

Carpet Vinyl Patch Products

Surface Preparation

DURALEVEL 83P Self-Leveling Underlayment

DURALEVEL™ 83P is a high compressive strength, self-leveling, cement-based underlayment used to repair, smooth and level concrete as well as existing ceramic, terrazzo or approved plywood subfloors prior to the installation of carpet, vinyl, VCT, laminate, solid and engineered hardwood flooring, ceramic or natural stone.

  • DURALEVEL 83P is suitable for thickness from feather-edge to 1” thick, or up to 5” thick when mixed as designed with pea gravel. Use on, above or below grade.
  • Use DURALEVEL 83P in smaller installations where it can be mixed by hand, or use underlayment pump to quickly cover large jobs.
Resources
TDS, MSDS, LEED Compliance Letter
D-261 Extreme Moisture Vapor Barrier Coating

D-261™ Extreme Moisture Vapor Barrier Coating is a two-component, penetrating epoxy formulated to incorporate Bostik’s Blockade™ antimicrobial protection and dramatically reduce moisture vapor transmission from substrates including “freshly-poured/green concrete”, properly-prepared concrete, cement backer board, cement patch/underlayments, radiant heat flooring, and cement-based terrazzo prior to the installation of carpet, vinyl/VCT, engineered or solid hardwood, porcelain, marble, granite, or ceramic tile floor covering.

Resources
TDS
Bostik UltraFinish™ Portland Cement-Based Patch

Bostik UltraFinish™ is a fast-setting, latex-fortified, Portland cement-based patch for interior use prior to the installation of hardwood, ceramic, carpet, vinyl, or rubber flooring. This product may be used to skim coat or feather-edge up to 1" deep in one application. Floor covering can be installed typically in as little as 15-20 minutes over concrete, wood, ceramic and quarry tile without the requirement of priming or the use of a liquid additive. When mixed with Durabond D-L16™ High Strength Additive or Bostik's Hydroment 425 Multi-Purpose Acrylic Latex Admixture instead of water, Bostik UltraFinish can be used as an embossing leveler.

This product contains Bostik's Blockade™ Antimicrobial Protection, which inhibits the growth of bacteria, mold, or mildew on the surface of the dried cement; the dried cement resists stains caused by mold.

 

MSDS (http://msds.bostik-us.com)

Resources
TDS, TDS (French), LEED Compliance Letter
Webcrete 95 Portland Cement Patch

Webcrete 95 is a fast-setting, latex-fortified, Portland cement patch for interior use. Webcrete 95 may be used to skim coat or feather-edge finish up to 1/2” deep in one application. Floor covering can be installed in as little as an hour after application. Webcrete 95 is extremely flexible and resilient for patching and smoothing floors prior to the installation of ceramic tile, carpet, resilient and wood flooring. When mixed with D-L16 instead of water, not only is the performance and flexibility improved, but Webcrete 95 can also be used as an embossing leveler.

Resources
TDS, MSDS, LEED Compliance Letter
Webcrete 98 Premium Portland Cement Patch

Webcrete™ 98 is a premium, fast-setting, specially-formulated, latex-fortified Portland cement patch for interior use. Webcrete 98 may be used to skim coat or feather-edge finish up to 1/2” deep in one application. Floor covering can be installed in as little as an hour after application. Webcrete 98 is extremely flexible and resilient for for patching and smoothing floors prior to the installation of ceramic tile, carpet, resilient and wood flooring. The high concentration of polymer in Webcrete 98 enables the use of this product as an embossed floor leveler when mixed only with water.

Resources
TDS, MSDS, LEED Compliance Letter
Webpatch D-9001

Webpatch D-9001™ is a premium, fast-setting, latex-fortified, gypsum-based material designed for interior installations for patching floors, walls, and other surfaces. Webpatch D-9001 can be used to fill cracks up to 1/2” deep over properly-prepared surfaces. Webpatch D-9001 may be mixed with DURABOND® 60L Latex Floor Underlayment Additive instead of water for improved performance. When used properly, this product provides a fast-setting surface that will not check, crack or break up.

Resources
TDS, MSDS, LEED Compliance Letter
Webpatch 90

Webpatch 90™ is a fast-setting, gypsum-based material designed for interior installations for patching floors, walls, and other surfaces. Webpatch 90 can be used to fill cracks up to 1/2” deep over properly-prepared surfaces. Webpatch 90 may be mixed with DURABOND® 60L Latex Floor Underlayment Additive instead of water for improved performance. When used properly, this product provides a fast-setting surface that will not check, crack or break up.

Resources
TDS, MSDS, LEED Compliance Letter
Universal Primer

Bostik Universal Primer is designed for use over concrete, approved plywood substrates, cement backer board, ceramic tile, marble, granite and terrazzo.

Resources
TDS, LEED Compliance Letter

Moisture Vapor Barrier Coatings

D-250 Moisture Vapor Barrier Coating

D-250™ Moisture Vapor Barrier Coating is a two-component, water-based, penetrating epoxy formulated to incorporate antimicrobial protection and dramatically reduce moisture vapor transmission from substrates including “freshly poured green concrete”, properly-prepared concrete, cement backer board, cement patch/underlayments, radiant heat flooring, and cement-based terrazzo prior to the installation of carpet, vinyl/VCT, engineered or solid hardwood, porcelain, marble, granite, or ceramic tile floor covering.

Resources
TDS, MSDS, LEED Compliance Letter, Warranty Registration Form
Extreme Primer

Durabond® Extreme Primer™ is a single-component, water-based primer formulated to dramatically improve the adhesion of Durabond cement patches and self-leveling underlayments to Durabond D-261™ Extreme Moisture Vapor Barrier Coating or Durabond D-250™ Moisture Vapor Barrier Coating.

Resources
TDS, MSDS, LEED Compliance Letter

Admixtures

60L™ Latex Additive

60L™ Latex Additive can be used with Durabond Webpatch™ 90 for subfloor preparation. The use of 60L with patches will provide improved resilience, adhesion, and resistance to water and alkali.

Resources
TDS, MSDS
D-L16™ Acrylic Latex Admixture

Designed as an admixture to use instead of water for thin-set and ceramic grouts. Provides improved shear bonds and compressive strength, frost resistance and stain resistance.

  • Use with Durabond® thin-set mortar products D-20™ Porcelain Set, D-25™ DitraSet , D-5™ Premium Mortar, D-2™ Floor Grade Thin-Set Mortar for exterior installations, porcelain tile, over plywood subfloors, or over D-222™ Duraguard.
  • Use with Durabond® Fortified Tile Grouts to improve bond to porcelain tile and to add flexibility, and for installations in freeze/thaw environments.
  • Use to prepare Portland cement bond coats and mortar beds.
Resources
TDS, MSDS, LEED Compliance Letter

Rubber Flooring Adhesive

GreenFusion™ Urethane Adhesive

Bostik GreenFusion™ is a solvent-free¹, single-component, trowel-applied, moisture-cured urethane adhesive specifically formulated for the installation of rubber flooring. Bostik GreenFusion is a 0-VOC formulation as calculated by SCAQMD Rule 1168. Once cured, this adhesive is not adversely affected by exposure to moisture or water; its superior properties provide a tenacious bond to a variety of surfaces either indoors or outdoors. GreenFusion has been formulated to exhibit a unique combination of application properties including excellent trowelability, fast tack/grab, low odor and easy cleanup.

GreenFusion can be used to adhere most rubber flooring, tile, stair treads, and nosing. GreenFusion can be used over all properly-prepared substrates common to rubber flooring installations, including concrete, asphalt, plywood, cementitious-based patch/underlayments and terrazzo.

This product contains BLOCKADE® antimicrobial protection, which inhibits the growth of bacteria, mold, or mildew on the surface of the dried adhesive; the dried adhesive resists stains caused by mold.

¹ This product is not formulated with any added solvents. Upon cure, the product produces a small amount of methanol.

Resources
TDS, MSDS, LEED Compliance Letter
Bostik GreenFusion2™ Urethane Adhesive

Bostik GreenFusion2™ is a solvent-free*, two-component, trowel-applied, urethane adhesive specifically formulated for the installation of rubber flooring in the most demanding environments where extra heavy traffic, rolling loads or extreme climatic conditions may exist. GreenFusion2 is a 0-VOC formulation as calculated by SCAQMD Rule 1168 that contains 27% renewable content. Once cured, this adhesive is not adversely affected by exposure to moisture or water; its superior properties provide a tenacious bond to a variety of surfaces either indoors or outdoors.

GreenFusion2 has been formulated to exhibit a unique combination of application properties including excellent trowelability, low odor and easy cleanup. When combined with a GreenFusion2 Colorpack, this adhesive can be pigmented a variety of colors to match floor coverings and improve seam appearance. GreenFusion2 can be used to adhere most rubber flooring, tile, stair treads, and nosing in addition to homogenous PVC, solid vinyl and artificial grass carpet.

GreenFusion2 can be used over all properly-prepared substrates common to rubber flooring installations, including concrete, asphalt, plywood, cementitious-based patch/underlayments and terrazzo.

This product contains Bostik’s BLOCKADE™ antimicrobial protection, which inhibits the growth of bacteria, mold, or mildew on the surface of the dried adhesive; the dried adhesive resists stains caused by mold.

*This product is not formulated with any added solvents. Upon cure, the product produces a small amount of methanol.

Resources
TDS, LEED Compliance Letter

Carpet Installation Adhesives

D-818 Tack Strip & Multi-Use Adhesive

DURABOND® D-818™ Tack Strip & Multi-Use Adhesive is a fast-setting, high-quality, moisture-cure urethane adhesive with excellent adhesion to concrete, patches, wood, plywood, metal, metal stair nosing, and many other properly-prepared surfaces. D-818 cures by reacting with moisture to form a tough, flexible adhesive that is tenacious and waterproof.
D-818 is recommended for installing tack strip to properly-prepared substrates above, on, or below grade; metal stair nosing; or for use as a flexible subfloor adhesive.

Resources
TDS, MSDS, LEED Compliance Letter
D-815 Carpet Seam and Multi-Use Adhesive

D-815™ Carpet Seam & Multi-Use Adhesive (formerly D-15) is a fast-grab, non-flammable adhesive for seaming and bonding carpet edges, tack strips, rubber cove base, rubber/metal reducers, or stair treads. D-815 is suitable for use over dry surfaces including concrete and plywood.

  • As a carpet seam adhesive, D-815 works well with many types of backings, including hot melt, latex unitary, woven,    Axminster®, enhancer, ActionBac®, jute, rubber and outdoor carpet.
  • As a tack strip adhesive, D-815 quickly adheres tack strip to concrete or plywood and can be power stretched in as little as one hour.
  • As a rubber and metal adhesive, D-815 acts as a fast-setting contact cement.
Resources
TDS, MSDS

Wall Surface Adhesives

D-745 Fire Retardent Wall Adhesive

D-745™ Fire Retardent Wall Adhesive is a high-performance, fast-grab, firm-set, low-VOC, acrylic adhesive designed for bonding wall carpet where a Class "A" rating for both flame spread and smoke development is required by the following test standards:  ASTM E 84, NFPA No. 255 and UL No. 723.

Resources
TDS, MSDS, LEED Compliance Letter
D-740 Multipurpose Wall Adhesive

D-740™ is a high-performance, firm-set, acrylic adhesive designed for use on rubber and vinyl cove base, FRP panel and wall carpet. As a cove base adhesive, the initial wet suction of D-740 is strong enough to hold tight corners of all types of rubber and vinyl cove base. D-740 can be used over dry substrate surfaces including drywall, latex painted surfaces, concrete, brick, wood and particle board. D-740 is a low-VOC formulation that meets the toughest air quality restrictions, including SCAQMD1168. D-740 is ideal for schools, offices, retail stores, health care facilities, apartments, homes, hotels, and other similar areas.

Resources
TDS, MSDS, LEED Compliance Letter
D-731 Cove Base Adhesive

D-731™ is a high-performance, firm-set, acrylic adhesive. The wet suction of the D-731 is strong enough to hold down corners on cove base. D-731 Cove Base Adhesive may be used for bonding vinyl and rubber cove base to concrete, masonry, drywall, painted surfaces, wood, and particle board.

Resources
MSDS